Looking for some help

[skygunner58203]

So I've been the happy owner of an 05 SXT for a couple years now. Unfortunately, I need to remove the Front Driver's door wiring harness completely and solder the wires back together, or replace it entirely. Seems that over half the wires are broken inside the boot between the door and body. Does anyone have a video guide or pictures of how to remove it? I have tools to pull the panels and whatnot.

[jkelly16]

I would bet there's video on YouTube that shows how to do it.

[skygunner58203]

That is actually the first place I looked. I checked Google, duckduckgo, even bought the digital haynes manual. Thats why I was wondering if someone on here had made a video or photo guide on this.

[Magnasport]

Its easier than you think, Pull the boot back and you will see a single 24 pin connector that plugs the door to the body, unplugging that should make it much easier to work on the wiring if you have to pull it out. That being said a door harness from a local U-pull it place will run about $10.00 and you will get see first hand how to remove and install before starting on your own door.